For applications not using Outdoor RF Head
The Model 5410 dual synthesized 70 MHZ to L-band Upconverter is designed for use without block up converters. The frequency stability and phase noise characteristics of the Model 5410 Up Converter are suitable for fractional T-1 digital SCPC Carriers.
Specifically optimized for TDMA applications.
| Specifications | ||
| Input Frequency | … | 52 to 88 MHz |
| Output Frequency | … | 950 – 1525 MHz |
| Frequency Sense | … | (non-inverted, filtered) |
| Input Impedance | … | 75 ohm |
| Output Impedance | … | 50 ohm |
| Input Level | -25dBm | |
| Output Leve | … | 0dBm max, -29dBm min |
| Gain | … | 25dB, maximum |
| Level stability | … | +2 dB,maximum (in any 36 MHZ band) |
| L.O. Reference | … | 10 MHZ internal |
| Frequency stability | … | 1.0 ppm |
| Phase Noise | … | >75dB/Hz, 1 kHz from carrier |
| Noise Figure | … | <14dB |
| Third Order Distortion | … | >40dBc for 2 Carriers at -10dBm Output |
| IF level adjust | … | Local or Remote |
| Sum Alarm Output | … | Relay, Form C |
| Input Connector | … | BNC – Female, 75 ohm |
| Output Connector | … | Type-N, Female, 50 ohms |
| Optional DC Power | … | Contact factory for availability |
| Primary Power | … | 90 – 264 VAC, 47 – 63 Hz, 45 Watts Max |
| Dimensions | … | 1 RU, 19″ x 16″ x 1.75″ |
| Monitor and Control Connector | … | DB-9, Female |
| Monitor and Control Interface (must be specified when ordering) |
… | RS-232 or RS-485 |